Airspan AIRVELOCITY 2700, Руководство по установке

Страница: 21 / 27

AirVelocity 2700 5G Sub-6Hz
4T4R Indoor Radio Unit – Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N: DUG01251 Rev. A3, Apr 2021
17
4.2 Wall Mount
The following describes the Wall mounting procedure:
1. Select the required location where the AirVelocity unit is to be installed on the wall.
2. Utilize the mounting bracket and position it against the wall where the unit is to be
mounted. Position with the Arrow symbol pointing up. Be sure to position the mounting
bracket
straight and level mounting to ensure the unit sits level.
3. Mark the holes positions carefully through the mounting bracket onto the wall. See Figure
11 .
4. Drill the four (4) holes. After drilling insert wall plugs (x4) (not included).

Wall plugs (x4) and necessary hardware are not supplied by Airspan and are the
responsibility of the installer. Use appropriate wall plugs according to field conditions.
5. Position the back bracket on the wall and drive the screws into inserted plugs, as shown
below:
Figure 15: Fix Mounting Bracket on Wall
6. Lift and carefully align and position the unit (verify that the 4 screws already inserted) so
that the protruding screw heads engage the key-hole slots on the mounting bracket.
Figure 16: Mount Unit on Mounting Bracket