background image

 
 

© Copyright by 

Airspan Networks Inc., 

2019 - 2019. All rights reserved worldwide. 

Legal Notices 

The information contained within this document is proprietary, privileged and intended only for the recipient. As such, the 

information is subject to all relevant copyright, patent and other laws protecting intellectual property, as well as any spec ific 

agreements protecting Airspan Networks Ltd. rights in the aforesaid information. Neither this document nor the information 

contained herein may be published, reproduced, transmitted or disclosed to third parties, in whole or in part, without the 

express, prior, written permission of Airspan Networks Ltd. In addition, any use of this document or the information contained 

herein for the purposes other than those for which it is disclosed is strictly forbidden. 
Airspan Networks Inc. reserves the right, without prior notice or liability, to make changes in equipment design or specifications. 
Information supplied by Airspan Networks Ltd. is believed in good faith to be accurate and reliable, while every care has been 

taken in preparing these documents. However, Airspan Networks Ltd. does not make any representations and gives no 

warranties of whatever nature in respect of these documents, including without limitation, the accuracy or completeness of any 

information, facts and/or opinions contained therein. No responsibility is assumed by Airspan Networks Ltd. for the use of the 

documents nor for the rights of third parties which may be effected in any way by the use thereof. The provision of these 

documents (and the documents themselves) does not constitute professional advice of any kind. Any representation(s) in these 

documents concerning performance of Airspan Networks Ltd. product(s) are for informational purposes only and are not 

warranties of future performance, either expressed or implied. Airspan Networks Ltd., its affiliates, directors, employees and 

agents shall not be held liable for any damages or losses, of any nature whatsoever, arising from any use of and/or reliance on 

the documents.  
These documents may contain flaws, omissions or typesetting errors; no warranty is granted nor liability assumed in relation 

thereto unless specifically undertaken in Airspan Networks Ltd. sales contract or order confirmation. Information contained 

herein is periodically updated and changes will be incorporated into subsequent editions. If you have encountered an error, 

please notify Airspan Networks Ltd.  
Product performance figures quoted within this document are indicative and for information purposes only. 

Содержание AirSpeed 1050 B40



















































Отзывы: