background image

13

UVHEALTH BIO2000 Installation Manual

7.0  TROUBLESHOOTING GUIDE

If the germicidal UV lamp is not operating (when looking 
through the view port):

1.  Check to be sure there is correct voltage to the unit and 

the ballast is set for the correct voltage.

2.  Be sure the lamp connector is fastened securely.

3.  Check for loose electrical connections.

4.  Test with new lamp and if lamp still does not light, 

replace ballast.

7.1   CLEAN-UP OF BROKEN LAMPS

(see warnings in Section 3.0 of this manual)

UV lamps contain a small amount of mercury, like a 
typical fluorescent lamp. DO NOT touch any of the 
mercury with your bare hands.

1.  While wearing disposable, non-absorbent protective 

gloves, carefully pick up the large pieces of glass with 
your hands.

2.  Vacuum the entire area with a standard household 

vacuum cleaner ensuring the removal of all lamp 
material.

3.  Dispose of the pieces of glass, the vacuum cleaner bag, 

and the disposable gloves in a sealed garbage bag.

4.  Check with your local waste management authority for 

local disposal or recycling requirements. 

5.  Wash hands. Remove and wash clothes for added 

safety measures.

8.0  TECHNICAL SPECIFICATIONS

Description

Value

UV-C Germicidal Lamp

50 watts UV-C

Length in Duct

451 mm

UVHealth BIO2000 PCO TiO2 
Semiconductor

2.26 m

2

Weight

1.63 kg

Adjustable Voltage

120 or 230 volts

Lamp Life Efficiency Output

Up to 2 years

Average Static Pressure Drop

4.98 pa 

Application air flow range for 
the  UVHealth BIO2000

up to 1000 L/s (17.6 kW)

9.0  REPLACEMENT PARTS LIST

Replacement Part 

Number

Part Description

BIO2000PCO

BIO 2000 Honeycomb PCO 

105mm x 448mm

BIO2000CARB

BIO 2000 Carbon Filter

BIO2000BLST

BIO 2000 230V Replacement 

Ballast Assembly

BIO2000LAMP

BIO 2000 425mm (17.5”) 

Replacement Lamp

For replacement parts, contact your air conditioning 
specialist installer or maintenance provider.

10.0  WARRANTY

Our goods come with guarantees that cannot be excluded 
under the Australian Consumer Law. 

You are entitled to a replacement or refund for a major 
failure and compensation for any other reasonably 
foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced 
if the goods fail to be of acceptable quality and the failure 
does not amount to a major failure.

 AirSmart Pty Ltd provides a 1 year parts only warranty for 
faulty or defective goods. For warranty information about 
this product, visit www.uvhealth.com.au. 

If your UVHealth BIO2000 unit is not operating correctly, 
please contact the supplier or air conditioning specialist. 

Содержание Uvhealth BIO2000

















Отзывы: