AirSep AS-E, Инструкция по эксплуатации

Страница: 181 / 198

AS-D+—AS-P Series Instruction Manual 181
AirSep Corporation
6
www.magnalube.com
SAFETY DATA SHEET
SECTION 7: HANDLING AND STORAGE (CONTINUED)
Conditions for safe storage, including any incompatibilities: Store in accordance with local regulations.
Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from
incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready
for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not
store in unlabeled containers. Use appropriate containment to avoid environmental contamination.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
CONTROL PARAMETERS
OCCUPATIONAL EXPOSURE LIMITS :
Ingredient name Exposure limits
Distillates (petroleum), solvent-dewaxed heavy paraffinic ACGIH TLV (United States, 4/2014) .
TWA: 5 mg/m³ 8 hours. Form: Inhalable fraction
NIOSH REL (United States, 10/2013) .
TWA: 5 mg/m³ 10 hours. Form: Mist
STEL: 10 mg/m³ 15 minutes. Form: Mist
OSHA PEL (United States, 2/2013) .
TWA: 5 mg/m³ 8 hours.
Appropriate Engineering Controls: Good general ventilation should be sufficient to control worker exposure to
airborne contaminants.
Environmental Exposure Controls: Emissions from ventilation or work process equipment should be checked
to ensure they comply with the requirements of environmental protection legislation. In some cases, fume
scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions
to acceptable levels.
INDIVIDUAL PROTECTION MEASURES :
Hygiene Measures: Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should
be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that
eyewash stations and safety showers are close to the workstation location.
Eye/face protection: Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact
is possible, the following protection should be worn, unless the assessment indicates a higher degree of
protection: safety glasses with side- shields.