AirScape 2.5E Скачать руководство пользователя страница 10

AirScape 2.5e Whole House Fan Installation Manual, 03152016

©AirScape, Inc., 2016. All Rights Reserved.

 Page 10

SPECIFICATIONS*

Speed Setting

1

2

3

4

5

Tested Airflow (CFM):

800

1400

1600

1950

2550

Tested Electricity Consumption (watts):

40

50

70

110

205

Tested Efficiency (watts/CFM):

20

28

22

17

12

Tested Noise (dBA):

36 – 54 dBA (min. speed to max. speed; tested at 45 ̊ and 1 meter from source)

Rough Opening Dimensions:

14.5” x 22.5”

Grille Outer Dimensions:

16” x 24”

Grille Build:

Cube Core, Aluminum, White Powder Coat

Backdraft Damper Dimensions:

27” x 20.25” x 14.25” (L x W x H)

Duct Length:

7 ft.

Duct Diameter:

20”

Electrical:

110VAC, 60 Hz, 3.3 max amps

Insulation:

R-10 standard, R-49 XR

Controls:

Low Voltage; Hardwired Wall Switch, web interface, optional wireless remote

Installation:

Installs easily on 24” or 16” O/C framing

Warranty:

3 years

*Actual performance will vary from installation to installation. Due to our continual product improvement 

efforts, performance ratings and specifications are subject to change without notice.

WIRELESS REMOTE (OPTIONAL) & WEB CONTROLS

A wireless remote is an available accessory for this fan. It is not included as part of this fan’s standard con-

trol package. See the yellow “Controls” manual for specific instructions for this accessory’s installation and 
operartion. Briefly, the steps for installing the remote are as follows:

• 

Plug the provided blue CAT5 cable into the remote receiver and the blue 

RMT

 port on the fan’s control 

box. Renove the top cover of the remote receiver.

• 

Press and release the black button on the receiver’s circuit board to begin the merge sequence; the 
transmission LED on the receiver will illuminate.

• 

Press and release any botton on the wireless transmitter while the transmission LED on the reciever is 
illuminated; replace the top cover on the reciever.

This fan is network-enabled and can be connected to your home’s local area network by running CAT5 
cable from the white 

WEB

 port on the control board to your router. If it is so connected, this whole house 

fan can also be controlled by any computer, smartphone, or tablet with access to your home’s local area 
network. For more details, visit our blog at blog.airscapefans.com and type “web control” into the search 

field.

Contact AirScape technical support at 1.866.448.4187 or [email protected] with any questions.

Содержание 2.5E











Отзывы: