9
HOW TO USE
OPERATION & STOP
♣ Tip
·In order to be operated, the setting temperature should be higher than current temperature.
·After power On, the default mode is temperature control mode.
·During the operation if you push On/Off button, the heater is stop and the timer off fuction is
cancelled.
·The model equipped "pre-heater" is operating its heater for 2min. after burner ignition.
By this device, the oil warms up before being supplied to the burner, which improve remarkably
the ignition and inflammability.
The model equipped "solenoid valve (by-pass device) makes the remaining oil returned
to the oil tank.
For 10sec. from the time of burner off, the solenoid valve is operation, which makes remaining oil
returned to the oil tank, and by this device, the smell caused by unburned gas
are remarkably shrunk.
1. START WITH PRESSING “ON/OFF” SWITCH.
· Heater will be turned ON with “beep” sound, and
automatically operated.
· If you wish to stop the unit press “ON/OFF” switch
one more time.
2. SELECT THE DESIRED OPERATION TYPE USING
“TEMP/TIME” SWITCH.
3. Set the time or temperature by pressing
▲▼ switch.
· You can set the desired temperature between
“0~40℃”.
· Set the desired time limit between “15min ~ UP → ON
