Page
9
of
14
- Connect the
drive motor
to the
control
panel
with the
12m cable
. The electric
socket can be found inside the
drive motor
.
7.3 Assembly of the bed:
- Start connecting the sandwich Velcro flaps. The easiest way to connect the
flaps is to first patch the lower part of the Velcro all the way, then cover the top
part of the right side soft Velcro with the left side hard Velcro flap.
- You may inflate the bed. While inflating, adjust the position of the bed around the
mechanism with the help of the anchor points, to make sure the mechanism stands in the
middle of its designated hole.
- After inflating, add the
bed hole cover
.
- Add the
podiums/numbers
.
LOWER PART OF THE SANDWICH VELCRO
Step 1.
Step 2.
