12
13
BEFORE YOU START
BEFORE YOU START
Tie the Cuff
Resting for 5 minutes before measuring.
Wait at least 3 minutes between measurements. This allows your blood
circulation to recover.
For a meaningful comparison, try to measure under similar conditions. For
example, take daily measurements at approximately the same time, on the same
arm, or as directed by a physician.
1. Remove all accessories from your left arm.
If your physician has diagnosed you with poor
circulation in your left arm, use your right arm.
2. Roll or push up your sleeve to expose the skin.
3. Apply the cuff to your left arm with your palm facing up.
4. Position the edge of the cuff about 2-3 cm.
5. Fasten the arm cuff around your arm, leaving no extra room
between the cuff and your skin. If the cuff is too loose, the
measurement will not be accurate.
6. Correct Posture for Patients with Hypertension, especially for
Hypertension patient
- Bare your arm or wear tights only when starting measurement.
- Sit comfortably with legs uncrossed, feet flat on the floor, back
and arm supported.
The central of the cuff should maintain at the same level as the
right atrium of the heart.
Pair up the Blood Pressure Monitor
with Your Device
1. Download and install the
Airon app
on your device which
supports Bluetooth 4.0 technology. (For iPad, download the
iPhone app).
2. Start the app, sign up and register your user informations.
3. Push the "settings" symbol in the upper right hand corner.
4. Push the "+" sign to add the activity monitor.
5. Push the BT4.0 symbol in the app
and hold the ACTIVATION button on the
blood pressure monitor to start pair-up.
6. The symbol and the symbol will be shown on
the LCD alternatively, indicating pair-up is proceeding.
If succeed, symbol will be shown on the LCD.
If fail, symbol will be shown on the LCD.
7. The monitor will shut off automatically after pair-up
process is complete.
Bluetooth Module No. : nRF8001
Frequency Range
Output Power Range
Supply Voltage
2.402 - 2.480 GHz
0 dBm
3.3 V
