Monitor Components
List
1.Blood Pressure Monitor
(LS808-B)
2.AC Adaptor
3.User Manual
BEFORE YOU START
6
1. The battery of LS808-B is built-in rechargeable
li-polymer battery, the battery current is 1000 mAh.
2. Please use the AC adaptor to charge
the battery, just like the following picture:
Power Supply and Charge Power
Charging the power under following circumstances:
displays on the LCD
The LCD display dims
When powering on the monitor, the LCD doesn’t light up.
AC adaptor
CAUTION
1. The battery of LS808-B is built-in rechargeable li-polymer battery,
please do not disassemble it by the unauthorized maintenance personel.
2. Under the normal using, it can charge power about 300 times,
if the battery cannot charge the power normally or the blood pressure
monitor cannot use normally, please connect with the authorized
maintenance personel. If measured three times per day, and the battery
is fully charged, it can be used for about 20 days.
3. Storge and use the blood pressure monitor at the cool, dry and
ventilated environment. Avoid to approach to the fire and the heat
source, or it will cause the battery explode.
4. Only can use the Transtek’s authorized AC Adaptor to charge the power.
You cannot use the blood pressure monitor during the process of charging.
5. During the process of charging, the blood pressure monitor display
When the charging is finished, please pull the plug in time.
6. When charging, shall not touch charging connector and the patient
simultaneously.
7
4. Cuff (22-32cm) (Type BF Applied Part)
INTRODUCTION
(Please use TRANSTEK
authorized cuff.)
Component list of
pressure measuring system
1 PCBA
2 Air pipe
3 Pump
4 Valve
5 Cuff
SYSTOLIC PRESSURE
DIASTOLIC PRESSURE
QUERY/UP
BUTTON
USER 2/ACTIVATION
BUTTON
USER 1/SET
BUTTON
CUFF
(Type BF applied part)
PULSE RATE
ON/OFF BUTTON
DC POWER SOCKET
