background image

8

Installing the Product

Functional Description

Icon

Name

Description

Power

ON/OFF

When the product is plugged in and on standby, the “POWER” button turns on the 

product. Pressing “POWER” again sets the unit to standby. (The icon is red when in 

standby and green when powered on)

If you press the power button on the operation panel while the product is running, 

the product will enter standby mode. (And the icon will turn red)

TIMER

When the product is on, each time the “TIMER” button is pressed, it will add 1 hour 

to the run time. When it accumulates to 12 hours, an additional press of the button 

will turn it off. (The icon will stay on when the product operates in “TIMER“ mode, oth-

erwise it will be off)

AUTO

When the product is on, after pressing the “AUTO” button, the negative ion genera-

tor and germicidal lamp will start to work, and the gears will change according to the 

sensor’s data. (The icon will stay on when the product operates in “AUTO” mode, oth-

erwise it will be off). If the speed is changed under “AUTO” mode, the product will quit 

this mode automatically.

SPEED

When the product is on, press “SPEED –” or “SPEED +” to switch the gear and change 

the operating speed. After the gear speed is changed, the motor will work only at the 

setting level without being affected by the sensor. (By pressing the “SPEED” button, 

the product will quit “AUTO” mode)

SLEEP

When the product is on, it will turn to sleep mode 5 seconds after the “SLEEP” button 

is pressed. In sleep mode all lights turn off and the product works in first gear. To wake 

it up, press any button then press “SLEEP” to quit sleep mode. Product is operational 

iin “SLEEP” mode. In “AUTO” mode, when surrounding light is reduced for two minutes

this product will continue running in “SLEEP” mode. When surrounding light increases 

for 3 minutes, it will exit sleep mode and continue to run in auto mode.

Gear

PM2.5 Data

Light 

Color

Gear

PM2.5 Data

Light 

Color

1

0~50

Green 

(Good)

5

121~140

Yellow 

(Below 

Average)

2

51~80

6

141~160

3

80~100

Blue 

(Average)

7

161~300

Red 

(Poor)

4

101~120

8

301~500

SPEED-

SPEED+

Содержание WAD-M20















Отзывы: