Confirm that the vent tube has been mounted properly.
• When using functions on cooling and dehumidifying, keep an interval of at least 3 minutes
between each ON/OFF.
• Be sure wall socket provides standard 110-115V AC, 60Hz use.
• Do not share one socket with other appliances.
•
Press the “MODE” button until the “Cool” or “Heat” (for models with Heat) icon appears.
• Press the “DOWN” or “UP” button to select a desired room temperature between 61-88°F (16-31°C).
•
Press the “SPEED” button to select fan speed.
•
Press the “MODE” button until the “Dehumidify” icon appears.
•
The unit will automatically set the selected temperature to current room temperature minus
2°C/4°F
.
•
The unit will automatically set the fan LOW speed.
IMPORTANT:
Please read manual section “WATER DREAINAGE” regarding options for draining
collected water from the unit.
•
Press the “MODE” button until the “Fan” icon appears.
•
Press the “SPEED” button to select fan speed.
Timer ON setting:
•
When the air-conditioner is OFF, press the “TIMER” button and select a desired ON time using the
“UP” and “DOWN” buttons.
•
Confirm the selected time by pressing the “TIMER” button once. (If you do not confirm, the TIMER
“ON” will not go into effect.)
•
Selected ON time is displayed on the operation panel.
•
ON time can be set to 0-24 hours in 1-hour increments.
Timer OFF setting:
•
When the air-conditioner ON, press “TIMER” button and select a desired OFF time using the “UP” and
“DOWN” buttons.
•
Confirm the selected time by pressing the “TIMER” button once. (If you do not confirm, the TIMER
“OFF” will not go into effect.)
•
Selected OFF Time is displayed on the operation panel.
•
OFF time can be set to 0-24 hours in 1-hour increments.
•
After machine turns on, press this key ON REMOTE CONTROL and the louver will swing continuously
up and down. By pressing this button again, the movement will stop, and the louver remain in that
position.
•
While in cooling mode, press the SLEEP key ON REMOTE CONTROL to set the temperature. It
increases
1°C/2°F
after an hour and at most increases
2°C/4°F
after 2 hours.
CAUTIONS
Cooling OR
Heating
Dehumidifying
Fan
Timer
Swing
(Flow Direction)
Sleep
9
operation
8
Buttons
and
Indicators
INDICATORS
BUTTONS
TIMER
Timer ON/OFF setting.
MODE
Select cooling, dehumidifying, fan or heat mode
DOWN
Set the temperature (or time), the temperature
(or time) will drop by 1°C/1°F (or 1 hour) with
each press.
UP
Set the indoor temperature (or time), the
temperature (or time) will rise by 1°C/1°F
(or 1 hour) with each press.
SPEED
Press to select either LOW, MEDIUM,
or HIGH fan speed.
POWER
Press to turn ON/OFF the unit.
Sleep
(Run from remote)
Timer setting
Heat mode
(Heat models only)
Fan mode
Dehumidify mode
Cool mode
Swing
(Run from remote)
High fan
Mid fan
Low fan
Water full
Main unit control panel indicators also
apply to remote control display area.
Button functions on remote control operate
in same manner as main unit control panel.
control panel
& remote functions
HEAT MODELS ONLY
(Heat
models
only)
Signal
strength
Note:
• Do not drop the remote controller.
• Do not place the remote controller in a
location exposed to direct sunlight.
