Step 20
Reinstall the diaphragm top
plate. Reinstall the four screws
with washers to the top plate and
securely tighten.
Step 21
Reinstall the compressor cover. Flip
the entire compressor upside down
and secure using the four screws
with washers. Tighten down firmly
to complete the installation.
Once complete, we recommend
to change the compressor air filter.
See instructions on pg. 8.
Step 18
Reinstall the rubber hose and
spring clamp. Now that this side is
complete, repeat steps 5 thru 17 for
the 2
nd
diaphragm before moving
on to Step 19.
Step 19
After completing both diaphragms,
double check to make sure you
have proper alignment between
the two stators.
P.O.Box 38 | Romeo, MI 48065
7
