Step 12
Push the front board firmly into
place and make sure the pegs come
through evenly on the reverse side
of the inner diaphragm.
Step 13
Install the inner diaphragm into the
armature with the two lines on the
front board being vertical.
Step 10
Apply the protective washer on top
of the diaphragm front board. The
diaphragm front board is the one
with four pegs.
Step 11
Align the four pegs up with the four
holes inside the inner diaphragm.
Align the two lines on the front
board to be pointing to the notches
on the inner diaphragm.
Notch
Notch
P.O.Box 38 | Romeo, MI 48065
5
