Step 11
Install the new leaf valves. Align
the leaf valve over the hole on the
valve plate and secure with a set
screw. Repeat for the second side.
Do not over tighten (Recommended
Torque: 10-13 in lb).
Step 12
Flip the valve plate over and repeat
the process for the other two leaf
valves, heating the screws with a
propane torch for approximately
5-20 seconds. When installing the top
two leaf valves, note to reinstall the
valve limiter with the curved portion
resting on the leaf valve. Ensure all
four leaf valves completely cover the
holes (Recommended Torque: 10-
13 in lb).
Valve Limiter
airmaxeco.com | 866-424-7629
Step 14
Flip the valve plate back onto the
cylinder and push down firmly to
secure into place.
6
Step 13
Install the two new o-rings onto the
bottom of the valve plate.
