Installation Instructions:
• 5/32” Allen Wrench
• 1/8” Allen Wrench
• T25 Torx Wrench
• Flathead Screwdriver
• Small Pick Tool
• Heat Source
Tools Required:
Step 1
Use a 5/32” Allen wrench to remove the
two screws holding down the airflow
manifold. Remove and save the two
bushings underneath the manifold.
Step 2
Use a T25 Torx wrench to remove
the remaining six screws on the
top of the cylinder heads. Take
note that the two inner screws are
shorter than the outer four screws.
Bushings
See Video Instructions of the G33 (RP33 82R)
Maintenance Kit installation online at
airmaxeco.com/InstallRP33
3
