Airmax MaxAir 100e P2, Инструкции по проектированию, установке и обслуживанию

Страница: 34 / 68

Page 34
Table 7 3-Zone Panel Configuration
Switch Number Switch Label Switch Function
1 Non-HP/Heat Pump Conventional or heat pump control of W/Y
2 Normal/Dual Fuel HP 1
st
Stage lockout on 2
nd
stage call
3 Rev Valve B/O O/B terminal active in heating (B) or cooling (O)
4 Fan Gas/Elect & HP Fan controlled by HVAC system or panel
5 Opp Call 20/15 Opposite call answer time in minutes
6 Lockout None/Active 2
nd
stage lockout with 2 zones calling
7 Priority All/Zone 1 Changeover priority zone 1 or first call
8 G2 W2-Zone/2 stages High speed fan will come on when 2 zones or 2 stages call
J1 Separate RC RH Remove for dual transformer installation
J2 Short Cycle Protection
When on, panel provides compressor short cycle
protection. When off, HVAC equipment provides short cycle
protection
ADDITIONAL FEATURES OF THE 3 ZONE PANEL .
The 3-Zone Panel has additional features to
control staging by monitoring the temperature
of the HVAC plenum. By using the Hi and Lo
Temp cutout switches the installer can
configure the panel to operate in the most economical mode.
When the 3-zone panel is configured for a
conventional system, the panel will upstage
the heating equipment if the plenum
temperature is 25 degrees less than the