airmaster 1499525, Инструкция по эксплуатации и техническому обслуживанию

Страница: 12 / 20

12
TURNING THE COMPRESSOR OFF
1. Follow steps 1-3 in “Removing Tools
from the Air Hose” above.
2. Disconnect the compressor from
the power supply.
3. Slowly open one of the outlet
valve to depressurise the reservoir.
• You will hear a hissing sound as
the reservoir depressurises.
• DO NOT leave the compressor
unattended if the reservoir is pressurised.
DRAINING THE AIR RESERVOIR
1. Turn the compressor off and
disconnect from the power
supply.
2. Put a container below the drain
valve to collect the condensate.
3. Open the drain valve slowly.
• Condensation will drain from
the reservoir.
4. Close the drain valve when the
reservoir has fully drained.
RESET BUTTON
This compressor has a thermal
overload device.
If the motor gets too hot, the thermal
overload device cuts the power
which prevents damage to the motor.
If the thermal overload device
operates, let the motor cool down for
5 minutes and push then the reset
button.
CAUTION: YOU SHOULD DRAIN THE AIR RESERVOIR AFTER EACH DAYS
USE AND BEFORE YOU PUT YOUR COMPRESSOR INTO STORAGE