background image

6

SAFETY SYMBOLS

The following safety symbols are shown on the product or it’s packaging. 
Please read all of the safety and operating instructions carefully before use.

ENVIRONMENTAL RECYCLING POLICY

By purchasing this product, the customer is taking on the obligation 
to comply with current WEEE regulations.

This means that this product must not be disposed of with general 
household waste. It must be disposed of according to the laws 

governing Waste Electrical and Electronic Equipment (WEEE) at a recognised 
disposal facility. This product contains valuable raw materials. Metal products 
should be taken to your local civic amenity site for recycling of metal 
products.

Read this instruction booklet carefully before positioning, 
operating or adjusting the compressor.

This compressor produces a high sound level during operation. 
Ear protection should be worn.

This compressor contains surfaces which may get hot during 
operation. Never operate with the motor housing removed.

This compressor should always be started or stopped by means 
of the start/stop button located on the control box. This reduces 
the risk of accidental start-up.

Wear eye protection when using this compressor.

Wear ear protection when using this compressor.

Содержание 1499510





















Отзывы: