AirMaid 5000 T, Руководство по эксплуатации, Страница: 6 / 8

7 6
5. SERVICE AND MAINTENANCE
6. TECHNICAL SPECIFICATIONS
The generator does not have any built-in filtration and must therefore be provided with clean filtered
air. If the air is not clean there is a risk for production disturbances in the ozone cell. The manufactu-
rer recommends that the ozone cell is regularly checked and cleaned, as necessary, to retain optimal
ozone production. The first service check shall be performed after one month in service; thereafter
the inspection interval can be increased as long as the ozone cell does not become dirty.
To check, clean or replace the cell the front panel first needs to be removed, then the cell (the black
molded module) can be loosened with two screws. Lift the cell gently from its mount and check the
glass rods. Never use any sort of sharp or hard tools such as screwdrivers or knives to clean the cells;
they are made of thin glass and can easily break. Clean the rods with a soft cloth soaked with a clea-
ning agent such as alcohol. Assure that the cell is placed back in its original orientation when remoun-
ting and that no cables are crimped by accident. Also, be observant with the placement of the white
high voltage cable, so that there is a space of at least 10 cm between the cable and the chassis and
also the remaining cables. Gently reattach the front panel so that the connected cables do not come
into contact with the white high voltage cable.
Ensure also that the input and output pipes are clear of dust or other sediments as this can reduce the
airflow through the generator.
If the airflow through the generator is too low (under 1m/s) then the generator risks becoming over-
heated. The generator is designed with a built-in heat sensor that automatically turns off the unit to
prevent overheating. In the case of overheating, when the temperature again drops to normal levels
this switch automatically resets and the generator is started up again.
Note: Service to the generator may only be performed while its electricity is shut off.
Models
AirMaid® 2000 T
AirMaid® 5000 T
Ozone capacity
0-2000 mg/h (AirMaid® 2000 T)
0-5000 mg/h (AirMaid® 5000 T)
Dimensions
WxLxH: 250x300x180 mm
Weight: 8 kg
Electrical data
A/C Source: 230V / 50-60 Hz
Consumption: 100 W (AirMaid® 2000 T)
100 W (AirMaid® 5000 T)
Fan capacity
160 m3/h (ideal)
Material
AISI 304
Ozone is dangerous to humans
and organic materials
Ozone is a powerful oxidant and exposures to
high concentrations are unhealthy. Local health
regulations regarding the use of ozone should
be observed.
Interzon recommends that all personnel who
use the ozone generator be educated regarding
the risks and precautions regarding exposure to
ozone.
Meets EMC and low-voltage directives.
For further information please contact Interzon AB.