27
OPERATING YOUR
APPLIANCE
This appliance is designed for operation at certain
ambient temperatures. The climate class is
specified on the rating plate.
The appliance may not work properly if it is left for a
long period at a temperature outside the specified
range. For example, placing your unit in extreme
cold or hot conditions may cause interior
temperatures to
fluctuate. The range between 5ºC
and 20ºC (41ºF and 68ºF) may not be reached.
Climate class
Ambient room temperatures
SN
N
ST
T
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
NOTE:
Units with no heater will not raise its
internal temperature if the ambient temperature
where the unit is located is lower than the set
temperature.
USE AND CONTROL
– SINGLE ZONE
The Controls of Your Unit
POWER
To turn the appliance on/off, press and hold the
key for 5 seconds.
NOTE:
Pressing the
key once can switch off the
audible alarm when the alarm is on.
LIGHT
Used to turn the inner light on/off.
UP
Used to increase (warm) the set temperature by
1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by
1°C/1ºF.
Display
Display the digital temperature and service
indicators.
Indicator Light
The indicator light is located at the right lower corner
of the display. The indicator light will be on when the
multi-key function is selected. To perform the multi-
key function, press and hold the first key, then press
the rest key for at least 5 seconds and then release
all the keys.
ºF/ºC
Selector
Select the temperature display setting in Fahrenheit
or Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit,
press and hold the
LIGHT
key for 5 seconds.
Key Lock (Optional)
If in 2 minutes or longer without pressing any key,
the key lock will be activated automatically. To
remove the lock, press the
UP
and
DOWN
keys at
the same time for at least 5 seconds and the
indicator light will flash three times to confirm the
action.
Setting the Temperature Control
•
The unit has single temperature zone. The
temperature can be set between 5ºC and 20ºC
(41ºF and 68ºF) which is ideal for storing red,
white or sparkling wine.
•
When the unit is plugged in for the first time, the
unit will power up automatically to the preset
defaults. The temperature preset at the factory
is 12°C (54ºF).
•
You can set the temperature as required by
pressing the
UP
or
DOWN
key. When you
press the two keys at the first time, the display
will show the last temperature set previously.
The temperature will increase 1°C/1ºF if you
press the
UP
key once, or the temperature will
decrease 1°C/1ºF if you press the
DOWN
key
once. The display flashes while you make the
setting.
•
After the temperature has been set, the display
shows the current inner temperature.
•
To view the set temperature at any time, press
the
UP
or
DOWN
key, the set temperature will
NOTE:
•
When you use the appliance for the
first time or restart the appliance
after
having been shut off for a long
time,
there could be a few degrees
variance
between the temperature you
select
and the one indicated on the
LED
readout. This is normal and it is
due
to the length of the activation time.
Once the unit is running for a
few
hours everything will be back to
normal.
•
If the unit is unplugged, power lost,
or
turned off, you must wait 3 to 5
minutes before restarting the unit. If
you attempt to restart before this time
delay, the unit will not start.
