AIRLUX AHV659BK, Руководство пользователя

Страница: 36 / 76

EN
3
6
36
USE
A B C D E F G H
Control panel
Button Function LED button
A The button only works when the door is open.
Press Briefly = Turns the
Lights On/Off at maximum intensity.
Press and hold for 2 Seconds = Turns the Courtesy Lights On/Off.
B Only works with the Door Open.
Press briefly = Activates/Deactivates
Delay mode, causing automatic
shutdown of the Motor and the Lighting system from any speed with
a 30’ delay. It is disabled by pressing the same button again, turning
the motor off or closing the door.
LED Button B + Button for the set Speed are lit.
Works both with the Door Closed and Open.
Press and hold for 2 Seconds = With the filter alarm triggered the
Filter Alarm is
Reset , all leds flashing 3 times. These indications are
only visible when the motor is turned off.
Fixed LED button:
Indicates the need to wash the metal grease filters.
The alarm is triggered after the Hood has been in
operation for 100 working hours.
Flashing LED button:
Indicates the need to change the activated charcoal
filters, and also to wash the metal grease filters. The
alarm is triggered after the Hood has been in
operation for 200 working hours.
C Only works with the Door Open.
Press briefly = Activates
speed four .
Fixed LED button.
Only works with the Door Open.
Press and hold for 2 seconds = Enables/Disables the
Intensive
speed. This speed is timed to run for 6 minutes. At the end of this
time the system will return to the speed set previously.
It is disabled by pressing the same button again, turning the motor off
or closing the door.
Flashing LED button.
D Only works with the Door Open.
Activates
speed three .
Fixed LED button.
E Only works with the Door Open
Activates
speed two .
Fixed LED button.
Works both with Door Closed and Open with Motor + Lights = Off.
Press and hold for 4 Seconds = Enables/disables the
Keyboard
lock .
All the LED buttons flash twice. During the Lock the
LED buttons light up in sequence.
F Only works with the Door Open.
Activates
speed one .
Fixed LED button.
Door Open or Closed
Press and hold for 2 Seconds = Enables/Disables the
Activated
Charcoal Filter Alarm with the Motor turned off and no Filter Alarm
triggered.
LED button B flashes twice = Activated Charcoal filter
Alarm Activated.
LED button
B flashes once = Activated Charcoal filter
Alarm Deactivated.
G Door Open
Press briefly =
Turns the Motor off
LED button goes out.
Door Open or Closed
Press and hold for 2 Seconds with Motor and Lights Off =
Enables/Disables the
Remote control .
LED button G + F flashes twice = Remote control
Enabled.
LED button
G + F flashes once = Remote control
Disabled.
H Door Open
Press briefly =
Closes the Door + Lights and Motor Off .
Door Closed
Press briefly =
Opens the Door + Lights and Motor On.
Warning : If the Door remains partially open for any reason, press the
Button to complete the opening or closing cycle.