AIRLUX AFC, Руководство по эксплуатации, Страница: 18 / 32

18
Operating
IMPORTANT
This function can only be selected when the
oven command functions are set to the rest
position
.
Once the door has been locked, you can
start cooking normally.
To activate/deactivate the door lock, follow
these steps:
1. Touch or until the symbol on the
display starts flashing.
The current door lock status will be dis-
played: “On” if it is active and “Off” if deacti-
vated.
2. Press . You will then hear a beep and the
block will start to activate if it was “Off”, or
deactivate if it was “On”.
WARNING
Before locking, ensure that the oven door is
properly closed. If not, it will not lock and an
alarm will sound.
If this happens, switch off the alarm by
pressing any clock button, close the door
properly and lock again as per the instruc-
tions above.
3. Once the door has been fully locked/un-
locked, the display will show the new door
status.
In the event that the locking system is active,
the symbol will appear constantly lit on
the display.
IMPORTANT
To unlock the door during cooking, turn the
function dial to standby and unlock the door
as described above.
Once the door is unlocked, turn the function
dial back to its former position to continue
cooking.
Pyrolytic self-cleaning function
Function available in pyrolytic models AFP.
WARNING
Before setting the pyrolytic cleaning cycle,
carefully read the safety instructions, which
you will find at the start of the Installation and
Maintenance guide.
This function allows you to carry out a pyrolyt-
ic cleaning cycle during which, due to the high
temperatures reached inside the oven, accu-
mulated grease undergoes a carbonisation
process.
The general recommendation is to perform a
pyrolytic cycle every 4-5 uses, using the most
suitable programme according to the level of
stains present in the oven. The more stained
the oven, the longer the duration of the pro-
gramme.
During the pyrolytic cycle the light inside the
oven will remain off.