background image

during wireless modes of operation. 
 
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may 
cause undesired operation. 
  
Any changes or modifications not expressly approved by the party responsible for 
compliance could void the authority to operate equipment. 
 

Federal Communication Commission (FCC) Radiation Exposure Statement 

 
This equipment complies with FCC radiation exposure set forth for an uncontrolled 
environment. In order to avoid the possibility of exceeding the FCC radio frequency 
exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) 
during normal operation. 
 
The antenna(s) used for this transmitter must not be co-located or operating in 
conjunction with any other antenna or transmitter. 
 
 

R&TTE Compliance Statement 

 
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE 
EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio 
equipment and telecommunication terminal Equipment and the mutual recognition of 
their conformity (R&TTE) 
The R&TTE Directive repeals and replaces in the directive 98/13/EEC 
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As 
of April 8, 2000. 
 

Safety 

 
This equipment is designed with the utmost care for the safety of those who install and 
use it. However, special attention must be paid to the dangers of electric shock and 
static electricity when working with electrical equipment. All guidelines of this and of 
the computer manufacture must therefore be allowed at all times to ensure the safe 
use of the equipment. 

EU Countries Intended for Use   

 
The ETSI version of this device is intended for home and office use in Austria, 
Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, 
the Netherlands, Portugal, Spain, Sweden, and the United Kingdom. 
The ETSI version of this device is also authorized for use in EFTA member states: 
Iceland, Liechtenstein, Norway, and Switzerland. 

EU Countries Not intended for use   

None. 

 

Содержание WT-2000USB



































Отзывы: