AirLive WL-1200CAM
User’s Manual
14
1.8 Log Onto Web Management Interface
Make sure the IP camera is correctly powered (Power LED is on), and then launch Internet Explorer
and type the IP address of the IP camera in address bar of Internet Explorer. You should be prompted
to input the user name and password:
Default user name is
‘
admin
’ (in lower case) and password is ‘
airlive
’. Click ‘OK’ to continue after user
name and password has entered.
If you
’re rejected, maybe the password has been modified previously. This should not happen if this is a
newly-purchased camera, however, if you get the camera from someone else, the password would be
changed. Please try to obtain the correct user name / password, or you
’ll have to reset the camera.
After logged on, you should see the following messages at the top of Internet Explorer:
This IP camera requires a special ActiveX control (A.K.A.
‘Plugin’) to work. Please click on the message,
and select
‘Install ActiveX Control…’:
When you
’re prompted, click ‘Install’ to continue.
