AirLive POE-GSH1008R-130, Руководство пользователя

Страница: 146 / 270

4.Web Management: System of POE-GSH1008R-130
AirLive POE-GSH1008R-130 User Manual
142
6. Rv :
Robustness Variable. The Robustness Variable allows tuning for the expected
packet loss on a network. The allowed range is 1 to 255; default robustness
variable value is 2.
7. QI :
Query Interval. The Query Interval is the interval between General Queries sent by
the Querier. The allowed range is 1 to 31744 seconds; default query interval is 125
seconds.
8. QRI :
Query Response Interval. The Max Response Time used to calculate the Max
Resp Code inserted into the periodic General Queries. The allowed range is 0 to
31744 in tenths of seconds; default query response interval is 100 in tenths of
seconds (10 seconds).
9. LLQI (LMQI for IGMP) :
Last Member Query Interval. The Last Member Query Time is the time value
represented by the Last Member Query Interval, multiplied by the Last Member
Query Count. The allowed range is 0 to 31744 in tenths of seconds; default last
member query interval is 10 in tenths of seconds (1 second).
10. URI :
Unsolicited Report Interval. The Unsolicited Report Interval is the time between
repetitions of a host's initial report of membership in a group. The allowed range is
0 to 31744 seconds, default unsolicited report interval is 1 second. .
11. Buttons :
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
4.8.2.3. Status
After you complete the MLD Snooping configuration, then you could to let the switch display
the MLD Snooping Status. The Section provides you to let switch to display the MLD
Snooping detail status.
Web Interface
To display the MLD Snooping status in the web interface: