AirLive POE-GSH1008R-130 Скачать руководство пользователя страница 101

Страница: 101 / 270

4.Web Management: System of POE-GSH1008R-130

AirLive POE-GSH1008R-130 User Manual

Reset-

Click to undo any changes made locally and revert to previously saved

values.

7. Auto-refresh :

To evoke the auto-refresh icon then the device will refresh the information
automatically.

8. Upper right icon (Refresh):

You can click them for refresh the Protocol Group Mapping information by manual.

4.4.7. IP Subnet-based VLAN

The IP subnet-based VLAN entries can be configured here. This page allows for adding,

updating and deleting IP subnet-based VLAN entries and assigning the entries to different

ports. This page shows only static entries.

Web Interface

To Display IP subnet-based VLAN Membership to configured in the web interface:

1. Click VCL, Group Name VLAN configuration and add new entry.
2. Specify the VCE ID, IP Address, Mask Length, VLAN ID and select Port

Members.

3. Click Apply.

Parameter description:

1. Delete

To delete a IP subnet-based VLAN entry, check this box and press save. The entry

will be deleted on the selected switch in the stack.

2. IP Address

Indicates the IP address.

3. Mask Length

Indicates the network mask length.

4. VLAN ID

Indicates the VLAN ID. VLAN ID can be changed for the existing entries.

Содержание POE-GSH1008R-130















































































































































































































































































Результаты поиска

Содержание POE-GSH1008R-130

Отзывы:

AirLive POE-GSH1008R-130, Руководство пользователя, Страница: 101 / 270

Результаты поиска

Содержание POE-GSH1008R-130

Отзывы: