AirLive
POE100CAMv2
User’s
Manual
43
SMTP:
Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP:
Select if POP before SMTP authentication is necessary when an e-mail is sent.
Note
：
• When you set to
On
, be sure to select either or both
SMTP
or/and
POP before SMTP
.
POP server name
：
It is necessary when the
POP before SMTP
is selected in
Authentication
. Type
the POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server.
This setting is necessary when the SMTP server which sends e-mails performs authentication using the
POP user account.
User name, Password
：
Type the user name and Password of the user who has the mail account. This
setting is necessary when the SMTP server which sends e-mails performs authentication.
Recipient e-mail address
：
Type the recipient e-mail address up to 64 characters. You can specify up to
three recipient E-mail addresses.
Administrator e-mail address
：
Type the Administrator e-mail address up to 64 characters. This
address is used for reply mail and sending system messages from the SMTP server.
Subject
：
Type the subject/title of the e-mail up to 64 characters. With respect to mail which is sent
according to the alarm detection when
Alarm sending
of the alarm tab is set to
On
, the characters
standing for the sensor type added to the subject.
Message
：
Type the text of the e-mail up to 384 characters. (A line break is equivalent to 2 characters.)
6.2.2.2 Alarm Sending
