.Installing and Removing the Power Supply
z
To remove a power supply out the chassis, you have to loose the hand screw counter
clockwise and pull out the power supply from the chassis.
z
To install a power supply to the chassis, you have to fasten the hand screw clockwise
and slide in the power supply to the chassis.
You c a n slid e in a nd out the p ower sup p ly from the b ay,
fa sten or loose the ha nd sc rew c loc kwise or c ounter
c loc kwise b y using hand or sc re wdriver.
Attention!
If the Chassis System needs to work alone, you can stick up four Rubber foot below
the chassis!
AirLive OV-MCR116 User’s Manual
6
