60
AirLive ARM-201 User’s Manual
4.5 Access Management
4.5.1 ACL
Go to
Access Management
Æ
ACL
to enable remote management. You may use telnet or Web to remotely
manage the ADSL Router. User just needs to enable Telnet or Web and give it an IP address that wants to
access the ADSL Router. The default IP 0.0.0.0 allows any client to use this service to remotely manage the
ADSL Router.
ACL:
There has
Activated
&
Deactivated
option. The default setting is
Deactivated
which means all IP can
access via router. If you choose
Activated
, you only can access via router by listed IP addresses.
ACL Rule Index:
Index number from 1 and up to 16.
Active:
Once you choose
Yes
then you can access the IP via router.
Application:
Each of these labels denotes a service that you may use to remotely manage the Router.
Choices are
Web, FTP, Telnet, SNMP, Ping, ALL
.
Interface:
Select the access interface. Choices are
WAN, LAN
and
Both.
For Example:
How to set your ACL?
1. You must choose
Activated
to enable your ACL function.
2. Select the ACL Rule Index number (up to 16 number)
3. You can set the specific
Secure IP address
or set
0.0.0.0
for all IPs.
4. Choose
the
Application
which you want to access for this ACL Rule index.
5. Select
the
Interface
you want to access from.
6. After all settings are ready, click
SAVE
and continue next ACL Rule Index setting.
