background image

5. Web Management 2: System Configuration and Status 

 

 

 

AirLive AirMax5N User’s Manual 

58

 

 

 

„

 

Upgrade Firmware:   

To update the AIRMAX5N firmware, first download the firmware from AirLive web site 
to your local disk, and then from the above screen enter the path and filename of the 
firmware file (or click 

Browse 

to locate the firmware file). Next, Click the 

Upgrade 

button to start.   
 
The new firmware will be loaded to your AIRMAX5N. After a message appears telling 
you that the operation is completed, you need to reset the system to have the new 
firmware take effect.   
 

Do not power off the device while upgrading the firmware. 
It is recommended that you do not upgrade your AIRMAX5N 
unless the new firmware has new features you need or if it has a 
fix to a problem that you’ve encountered. 

 

For the data structure might be change after firmware upgrade, 
it’s better for the administrator to reset the device to factory 
default for cleaning the original configuration data. 

 
 
 

5.1.7 Configuration Save and Restore 

System Configuration -> Configuration Save and Restore

 

 
You can save system configuration settings to a file, and later download it back to the 
AIRMAX5N by following the steps.   

 
 
 

Содержание AirMax5N/ESD

































































































Отзывы: