4. Web Management-Wireless and WAN Settings
AirLive AirMax5N User’s Manual
29
Add (to WDS)
: Please choose a SSID before click on this button. This button is
available only in Client, WDS or WDS + AP modes. Once you click on this button,
AirMax5N will attempt to make a connection with the selected network. If there is
encryption needed, the AirMax5N will prompt you to enter the encryption key. Please
make sure you enter the correct encryption key, the AirMax5N will not check whether
the encryption key is correct.
Signal Strength
: This is a value to show the signal level of the AirMax5N. In general,
remote APs with stronger signal will display higher level.
4.2.4 Radio Mode (11a, 11a/n mixed, 11n)
Operation Mode -> Setup -> Radio Mode
AirMax5N has 3 different options for WLAN transmission.
4.2.5 Channel
Operation Mode -> Setup -> Channel
The channel is the frequency range used by radio. In 802.11a standard, each channel
occupies 20MHz width and in 802.11n standard each channel could be either 40 or 20MHz.
For 2 wireless devices to connect, they must use the same channel. The number of
available legal channels might be different between countries. If you are living outside EU,
please change the country from the “
Regulatory Domain
” option in this page. Below is the
table list of channels and frequency.
Frequency Domain
Channel
Frequency (MHz)
36 5180
40 5200
44 5220
5.15 to 5.25GHz
U-NII Low
ETSI Band1
48 5240
Click here to select
SSID for Association
or Signal Survey
For antenna
alignment. It will
display signal value
once a second.
To connect with the
selected SSID. This
function is available only
in Client or Bridge Mode
