3. Making Configuration
AirLive GW-300NAS User’s Manual
20
C. PPP over Ethernet
Activate WWAN for Auto-Failover: With this function enabled, when the Ethernet WAN
connection is broken, the device will automatically activate the WWAN connection and keep
you connected to internet with the alternative WWAN broadband service. Meanwhile, if the
device detected that the Ethernet WAN connection is recovered, your broadband connection
will be switched to use the Ethernet WAN service.
PPPoE Account and Password: The account and password your ISP assigned to you. For
security, this field appears blank. If you don't want to change the password, leave it blank.
Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is established.
Manually: The device will not make the link until someone clicks the connect-button in the
Status-page.
Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE session.
Set it to zero or enable “Auto-reconnect” to disable this feature.
PPPoE Service Name: Optional. Input the service name if your ISP requires it. Otherwise,
leave it blank.
