AIRLESSCO 25M232, Операция - Ремонт - Запчасти, Страница: 21 / 72

Clean-up
3A4637A Operation, Repair, Parts 21
8. Hold gun against paint pail. Disengage gun trigger
lock.
9. Gradually turn pressure control up until motor
begins to drive pump. Trigger gun until flushing fluid
appears.
10. Move gun to flushing pail, hold gun against pail, trig-
ger gun to thoroughly flush system. Release trigger
and engage trigger lock.
11. Open prime valve and allow flushing fluid to circu-
late for 20 seconds to clean drain tube.
12. Raise siphon tube above flushing fluid and run striper
for 15 to 30 seconds to drain fluid.
13. Set pump switch OFF. Turn engine OFF by pressing
the engine kill switch at the controls, or by moving
the lever on the engine.
ti30115a
ti30116b
ti30117a
NOTICE
Do not run pump without fluid flow. Damage to
packings can occur.
ti30118a
ti30119a
ti30388a
I
O
I
O