AIRLESSCO 25M223 Скачать руководство пользователя страница 16

TO PLACE AN ORDER OR FOR SERVICE,

 contact your Airlessco distributor, 

or call 1–800–223-8213 to identify the nearest distributor.

All written and visual data contained in this document reflects the latest product information available at 

the time of publication. 

Airlessco reserves the right to make changes at any time without notice.

Original Instructions.

 This manual contains English. MM 3A4408

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA

Copyright 2010, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.

Revision B, June 2017

Airlessco Standard Warranty

Airlessco warrants all equipment referenced in this document which is manufactured by Airlessco and bearing its name 
to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the 
exception of any special, extended, or limited warranty published by Airlessco, Airlessco will, for a period of twelve 
months from the date of sale, repair or replace any part of the equipment determined by Airlessco to be defective. This 
warranty applies only when the equipment is installed, operated and maintained in accordance with Airlessco’s written 
recommendations.

This warranty does not cover, and Airlessco shall not be liable for general wear and tear, or any malfunction, damage or 
wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, 
accident, tampering, or substitution of non-Airlessco component parts. Nor shall Airlessco be liable for malfunction, 
damage or wear caused by the incompatibility of Airlessco equipment with structures, accessories, equipment or 
materials not supplied by Airlessco, or the improper design, manufacture, installation, operation or maintenance of 
structures, accessories, equipment or materials not supplied by Airlessco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Airlessco 
distributor for verification of the claimed defect. If the claimed defect is verified, Airlessco will repair or replace free of 
charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection 
of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, 
which charges may include the costs of parts, labor, and transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, 
INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A 
PARTICULAR PURPOSE

Airlessco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer 
agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, 
injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of 
warranty must be brought within two (2) years of the date of sale.

AIRLESSCO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, 
MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY Airlessco

. These items sold, but not 

manufactured by Airlessco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their 
manufacturer. Airlessco will provide purchaser with reasonable assistance in making any claim for breach of these 
warranties.

In no event will Airlessco be liable for indirect, incidental, special or consequential damages resulting from Airlessco 
supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, 
whether due to a breach of contract, breach of warranty, the negligence of Airlessco, or otherwise.

FOR AIRLESSCO CANADA CUSTOMERS

The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal 
proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in 
English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous 
documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite de ou en rapport, directement ou 
indirectement, avec les procédures concernées.

Airlessco Information

For the latest information about AIRLESSCO products, visit 

www.airlessco.com

.

For patent information, see 

www.graco.com/patents

Содержание 25M223

















Отзывы: