Airistar 100GT Скачать руководство пользователя страница 6

Melt-Blown Fiber 
Filter Media 

  

  

             

Melt-Blown Fiber filter media is the next 

 

 

         generation of HEPA filter media.  The Melt-

Blown Fiber filter media used in the Airistar

®

 100GT is rated to 

capture 95% of particles larger than 0.3 microns at airflow ratios that 
surpass traditional HEPA filters.

Activated Carbon
VOC Filter

  

  

             

VOC’s are gases and odors that are emitted

 

 

         from certain solid and liquid compounds.

Airistar’s multipurpose VOC filter helps eliminate unwanted
gases and fumes associated with tobacco products.

MERV 8 Pre-filter

  

  

             

Our pre-filter is MERV 8 pleated media. It is

designed to remove larger airborne particles in the range of 
3-10 microns in size or larger. This would include substances such 
as certain types of bacteria, mold and plant spores, as well as lung 
damaging dust. By extracting these larger particles first; this allows
the two remaining filters to collect smaller particulate at a more 
efficient rate.

Pre-filter

Melt-Blown

Fiber Filter

Activated 

Carbon Filter

12

3

Содержание 100GT











Отзывы: