4-10
BIOS Setup
When the Supervisor Password is set, the new item
User Access Level
and
Password Check
will be added in the menu. You can make further
settings of access right in the
User Access Level
item. Setting options:
No Access
,
View Only
,
Limited
and
Full Access
. The Password Check
item is used to specify the type of BIOS password protection that is
implemented. Settings are described below:
Setup
The password prompt appears only when end users try
to run Setup.
Always
A password prompt appears every time when the
Notebook is powered on or when end users try to run
Setup.
To clear a set password, just press [
Enter
] when you are prompted to enter
the password. A message box will show up confirming the password will
be disabled. Once the password is disabled, the system will boot and you
can enter Setup without entering any password.
About Supervisor Password and User Password
Supervisor Password allows the user to enter and change the
settings of the setup menu; User Password only allows the user to
enter the setup menu, but do not have the right to make changes.
