Airgroup ARENA 2 ZONE, Инструкция пользователя, Страница: 8 / 14

8
Heat Fail
2 ZONE
In HEAT mode and not in the Defrost status if the compressor has been operating more than the 3 minutes but the indoor coil
temperature is still below 25
o
C, the compressor has failed. The controller will send the alarm by blinking LED on the display.
To exit is by turning off the air conditioner or changing the mode of operation.
Error Display
When there is any error, there will be an alarm on the Display unit as follows:
Alarm signal Description
Zone 1 LED blinks with signal as per Fig. A Freeze or Defrost function is activated.
Zone 1 LED blinks with signal as per Fig. B Cooling or Heating fail function is activated.
Timer LED blinks with signal as per Fig. A
Room or Freeze or Defrost sensor‟s error
Timer LED blinks with signal as per Fig. B Compressor overload or Anti-overheat function is activated
All LED blink with signal as per Fig. A
System operation is stopped due to both zone dampers are
turned off.
CONCLUSION OF FEATURES
PAGE # DESCRIPTION LCD WIRED COOL LCD WIRED HEAT
Page 3 Users Features
Page 3 Power On/Off
 
Page 3 Fan
 
Page 3 Zone Control
 
Page 3 Operating Mode
Page 10 Temperature setting
 
FLASH FLASH PAUSE
CONSTANT FLASH