Airgineers Micro Drone, Инструкция по эксплуатации, Страница: 6 / 16

6
Airginners Manual version 1.0 2022
Binding the drone to the transmitt er
STEP 1 STEP 2
STEP 4
STEP 3
Remove the canopy from the frame
by unscrewing the two screws
TIP: Get someone to help you with this step. The battery needs to be connected at the same time as pressing the
button on the receiver board to bind correctly. While pressing down on the button on the receiver connect the
battery, as shown. Hold down the button on the receiver until the green LED (fast blink) comes ON (see Step3).
Turn on the transmitter by
pressing the two ON/OFF
buttons located either side
of the screen. Make sure
that all switches are in the
up position and the left-
hand control stick is down.
A green LED (fast blink) means the receiver is in
the bind mode, you can now release the button.
Reciever button Battery connectors
PRESS
STICK
DOWN
ALL
SWITCHES
UP
PRESS