Airgineers Micro Drone, Инструкция по эксплуатации, Страница: 4 / 16

4
Airginners Manual version 1.0 2022
Building the drone
STEP 1
STEP 3 STEP 4
STEP 2
Select the two Clockwise CW motors (Red and Blue wires). Place a motor
on top left and bottom right of the frame (as shown). Feed the motor cable
through the hole and out of theside, then slowly push the motor through the
hole as far as it will go. Repeat for the second motor.
Select the other two Counter-Clockwise CCW motors (Black and White wires)
and fit the motors in the two spare slots, as described in Step 1.
Turn the drone upside
down and plug the
motors into the
board. Take care to
connect each motor
to the connector
closest to that motor
(as shown).
Place an elastic band
around each of the
frame motor holders
and the cable to keep
the cable held tight
to the frame.
Attaching the motors
3