9
English
1. How do I know if Airfree
®
is no longer working?
Check the top lid, if cold the sterilisation system is not working. Please connect it to another
outlet and make sure the unit is in its vertical position for at least 1 minute.
2. Are there any side effects?
No. Airfree
®
’s new technology uses heat to purify the air with meaningless heat contribution to
the room. No side effects, no emissions, NO IONS, nor new particles are generated. Airfree
®
can be used in homes and offices, quietly, constantly, and efficiently purifying the air.
3. How do I shut the Night Light or the multi-colour Night Light off?**
Press the sensor touch button repeatedly to adjust the night light intensity or turn it off.
4. The top lights are blinking. What does that mean?*
On models with top lights it indicates that Airfree
®
is not correctly placed. Please make sure the
device is in its vertical position.
5. Can I install Airfree
®
in my walking closet ?
Yes if larger than 2x2 meters (4 m² or 10 m³). Otherwise it might warm up the closet.
6. Can I use Airfree
®
in air conditioned rooms?
Yes.
7. Can I place Airfree
®
at the corridor to reach adjacent rooms?
No. Airfree
®
will just reduce air pollution in the corridor’s area.
8. Can I place Airfree
®
in a closed room?
Yes. Please remember such a room must have at least 4 m² (10 m³).
9. Should I turn off Airfree
®
when I leave house?
To achieve best performance we recommend to keep Airfree
®
always on. Turning the unit off
will stop the sterilisation process allowing the room contamination to grow.
10. Can I change Airfree
®
from one room to another?
Airfree
®
must always be plugged in the same room 24 hours a day. Airfree’s patented
technology works gradually so, when removing it to another room the contamination in the
original room will start to increase.
11. Does CADR measure the effectiveness of the Airfree
®
?
Not at all. CADR is not designed to test the Airfree
®
technology. The AHAM seal
(usually found on the back of an air cleaner’s box) lists three Clean Air Delivery Rate
(CADR) numbers: one for tobacco smoke, one for pollen and one for dust. The CADR
indicates volume of filtered air delivered by an air cleaner. The reason why CADR is not
designed for Airfree
®
is because Airfree
®
does not filter but destroys microorganisms
instead, such reduction of bacteria, moulds, viruses and other microorganisms can only be
measured after air sample incubation in a microbiology lab. Airfree
®
destroys (not trap or
attract to other surface) any microorganism regardless of how small they might be. 99.99% of
all microorganisms are fully destroyed when passing through the Airfree
®
patented ceramic
core.
12. What happens if Airfree
®
is disconnected or there was a black out?
Airfree
®
will take approximately the same time to recover the previous reduced contamination
level.
13. Does Airfree
®
eliminate bacteria and viruses?
Yes. Unlike the air filters in the market Airfree
®
is more efficient with the smallest
microorganisms as they are easily carried by Airfree
®
’s airflow into the sterilising TSS
™
ceramic
core. Please check the independent bacteria and virus tests at our website.
Frequently Asked Questions
