- 7 -
Step 1.9
Put a bucket beside the unit
and then switch on the water
filling controller to let the
water flow over the filter for
30 seconds until the water
from left side is clean
Step 1.10
Take off the anti-drain plug
from the back of the unit
then connect to the water
pipe (the left one)
Step 1.11
Insert the water filling pipe
(1m) to the drain hole (the
right one)
Step 1.12
If you need to take off the
pipe or replace it, do as
follows:
First, take off the blue ring
labeled A then press the
white ring at the outer side
labeled B. Lastly, take out
the pipe.
Step 2
Plug in.
Step 3
Timer setting: Before pressing the ON/OFF button, press the TIMER/CLEAN button.
The TIMER indicator will then light up. Press + or - button to adjust the timer. If the timer function
is set, the indicator will light up.
Step 4
Press ON/OFF button, the unit will then start to make ice. LED screen will show
ambient temperature.
Step 5
Adjustment of ice making time: You can change the ice size by adjusting the ice making
time as follows: When the LED screen flashes, press + or - to adjust the ice making time for the
next cycles. One press of the + button and the number 1 will be shown on the screen. The ice
making time for the succeeding cycles will be one minute more (than the 10-minute default).
To elaborate: if you press + button once,
“1” will be shown on the screen, which means that the