AIRFLO AFD728, Инструкция по эксплуатации, Страница: 4 / 9

Parts
1. Topboard
2. Control panel
3. Door
4. Cabinet
5. Filter
6. Power lead
7. Door lock
8. Tumbling drum
9. Reset button
10. Program knob
11. Display screen
Parts * Installation
The socket and grounding wire must be installed by an electrician to prevent
incorrect installation and to guarantee the safety and correct use of the appliance. The
power wire of the dryer employs a Y connection. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified persons in order to
avoid any hazard. There should be no connection between the grounding wire and the
neutral wire, otherwise the cabinet will be charged which may likely cause electric shock.
The dryer employs alternative current with the rated voltage and frequency.
A special power socket for the dryer should be set aside for safety and convenience.
The socket’s method of connection is as the figure below:
Position the Dryer in a well ventilated
area for better air circulation and to
prevent any hazards.
It is advisable to wring or squeeze out
excess water from clothes before
placing them inside the Dryer.
Do not dry any clothes that are
contaminated with combustible (gas,
methylated spirits) materials
Do not spray combustible aerosols near the
Dryer during use. If accidental spray occurs,
do not touch the plug or the Start/Pause
button.
Do not operate the Dryer if damaged,
malfunctioning, partially disassembled or
has missing or broken parts.
Note that the Dryer will be warm to touch,
especially its back side. Keep children
away.
Make sure that your hands and feet are
not wet when handling or using the
machine.