4
7.
Remove the light kit housing
by loosening 3 screws on the
side.
8.
Insert blades into fan blade
holes.
9.
Fasten blade onto motor
assembly through rectangular
hole using the washer & motor
screws provided from hardware
bag.
10. Fan light housing installation
Loosen screws on terminal block first, for accepting new wires from
ceiling fan.
10-1.
Insert blue wire from ceiling fan into terminal block extending from
blue wire from light kit and tighten by screw on terminal block.
10-2.
Insert orange wire from ceiling fan into terminal block extending from
orange wire from light kit and tighten by screw on terminal block.
10-3.
Insert green /yellow wire from ceiling fan into terminal block extending
from green/yellow wire from light kit and tighten by screw on terminal block.
Attach light kit assembly onto fan light housing with 3 original screws.
11.
Remove the decorative cap
from the threaded pipe.
12.
Install two proper lamps to the
sockets (E14, max. 60W,
not included).
13.
Attach the glass shade up to
the light kit and secure it with
decorative cap.
