5
OPERATING THE FAN
Check the fan before switching it on!
Risk of injury:
The fan can only be operated if no defects have been found upon inspection.
In case a part is defective, it will have to be replaced before using the fan.
Risk of injury:
Before changing the fan rotating direction, the fan has to be switched off and come
to a complete stop.
Check that the fan is in safe operating condition:
-
Check to make sure that there are no visible defects.
-
Verify that all parts are properly installed and fastened.
Remote control
Install 9 volt batteries (not included) to the transmitter.
-
Press the "
" button to turn the light on or off.
-
Press one of the fan speed buttons to control the speed of the fan:
o
HI: High speed
o
MED: Medium speed
o
LOW: Low speed
-
Press the OFF button to turn off the fan.
Fan rotating direction switch
The switch on the fan housing controls the direction of rotation. This
changes the direction of air movement:
-
In cold weather: Push the switch “RIGHT” so that the fan will
circulate the warm air trapped near the ceiling to move
downwards throughout the room.
-
In hot weather: Push switch “LEFT” so that the fan will create a breeze and circulate the air to
the room.
CLEANING
Risk of injury:
Before cleaning the fan, always switch off the power at the main circuit breaker and
wait until the fan has come to a complete stop.
Clean the fan with a dry or damp soft cloth. Do not use any liquids or detergents.
DISPOSAL
Disposal of the fan:
You are required to dispose of electric and electronic appliances separately from
your household waste. Please inquire at your municipality regarding proper ways of disposal.
By separately disposing of your electric and electronic appliances, you are participating in recycling and
you are helping to prevent potentially toxic substances from polluting the environment.
Disposal of the packaging:
The packaging consists of cardboard and marked plastic and Styrofoam
which can be recycled. Please recycle.