Airelectronics U-Camera, Руководство пользователя

Страница: 23 / 30

U-Camera User Manual - U-Camera electrical connections
6
6
U-Camera electrical connections
U-Camera electrical connections
6.1 6.1 U-Camera main connectors pin-out U-Camera main connectors pin-out
As described in the previous sections U-Camera systems is composed by two main
elements: U-Camera Gimbal and U-Camera Board. The main harness connects the two of
them and provide the required external interfaces such as:
•
Video Output and Video Transmitter supply(12V)
•
Command Interface
•
Main Power Supply: 9-28V (9-17V without active cooling).
Both U-Camera Board and U-Camera Gimbal have DB-26 male conectors. To match this
connectors, U-Camera Harness must end in two DB-26 female connectors.
The pinout of the DB-26 ends is presented in the Figure 7 and following table. In the table,
harness internal connections are indicated with a green double arrow(
<-> ) while external
connections are represented with a single ended arrow ( <- or → ).
As indicated in section 4.1, the harness must be completely connected to all the elements
before powering up the system. IMPORTANT: remember to connect each end to the
proper element. Crossing the connectors of DB-26 Board and DB-26 Gimbal may result in
permanent damage to the gimbal if powered.
23
Figure 6: U-Camera Harness schematic