=English Version=
13
HOW TO LOCK THE CONTROL BOX:
You have chosen, for example, the Economy mode, press the
+
and
-
buttons simultaneously for approximately 3 seconds.
The flashing of the display indicates that the keypad is locked up.
If you press any button on the keyboard, the display announces, by
the symbol "FF", the impossibility to proceed for any orders.
To remove the keypad lock, operate as above.
« PROG » MODE:
This mode permits the automatic operation through a programming
unit.
To do this: Press the
MODE
button until the LED function light
“PROG” is on.
PARTICULARITES:
Please note that when Economy, Comfort or Anti-Frost MODE is chosen by the user, priority is given to
the Anti-Frost and STOP orders sent by a programming unit. The function light "
PROG”
flashes when
orders are received by the appliance.
MODE by programmer
MODE
chosen by user
Anti-Frost Signal
STOP Signal
19
EC
HG
DISPLAYS SETTINGS (THERMOSTAT / THERMOMETER)
Exceptionally, it may occur that there is a gap between the displayed temperature and your
thermometer. In this case, it is possible to harmonize the two settings.
This setting can be achieved only if your appliance is set between 17 and 23 °C.
All doors and windows must be closed.
Wait for the stabilization of the temperature in the room (at least 6 hours) and avoid as
much as possible whereabouts in the room.
The temperature control should be placed in the middle of the room to 1.20m from the
ground. Do not place it on any furniture.
Set the "Comfort" temperature with
MODE
button, e.g.
19
Push for 6 seconds
MODE
, this will open two possibilities:
1. Display is flashing
19
, a modification is possible:
• Correct with the
+
and
-
buttons
• Confirm with
MODE
