background image

TURBOCHILL Chillers

 

 

Chillers 

Installation Manual : 6703052 05/2008 

 

COVER 
ABOUT AIREDALE 

About Airedale Products & Customer Services 

 

The equipment carries the Airedale 

unit parts and labour warranty 

in respect of non-consumable 

parts, for a period of 

12 months 

from the date of commissioning or 

18 months

 from the date of 

despatch which ever is the sooner. (Excludes the cost of any specialist access or lifting equipment.) 
Commissioning will be carried out by Airedale International Air Conditioning Ltd. 

 

All Airedale products are designed in accordance with EU Directives regarding prevention of build up 
of water, associated with the risk of contaminants such as Legionella. 

 

Where applicable, effective removal of condensate is achieved by gradient drainage to outlets and 
where used, humidification systems produce sterile, non-toxic steam during normal operation. 

 

WARRANTY, 
COMMISSIONING & 
MAINTENANCE 

For effective prevention of such risk it is necessary that the equipment is maintained in accordance 
with Airedale recommendations. 

 

CAUTION

 

 

Warranty cover is not a substitute for Maintenance. Warranty cover is conditional to 
maintenance being carried out in accordance with the recommendations provided during the 
warranty period. Failure to have the maintenance procedures carried out will invalidate the 
warranty and any liabilities by Airedale International Air Conditioning Ltd. 

 

 

To protect your investment in the highly efficient TurboChill, we provide as standard, a 12 months 
ChillerGuard Service Plan. Following site installation, an Airedale commissioning engineer will set 
the chiller to work and optimise the control settings in order to meet application design.  

 

Once commissioned the ChillerGuard Service Plan provides a planned, preventative maintenance 
package to ensure optimum efficiency of the TurboChill. 

 

A priority, 24/7 emergency helpline; professional support and call-out service is on hand throughout 
the year with guaranteed response by a fully qualified Airedale engineer. ChillerGuard also ensures 
you are F Gas compliant and incorporates a full parts and labour warranty for the first 12 months. 

 

ChillerGuard packages can be tailored to include specific call out times and extended cover to meet 
your business needs. 

 

CHILLERGUARD 
SERVICE PLAN 

UK Mainland  

For customers outside the UK, our international distributors trained by Airedale would be pleased to 
offer service on Airedale units. 

 

SPARES 

A spares list for 1, 3 and 5 years will be supplied with every unit and is also available from our 
Spares department on request. 

 

TRAINING 

As well as our comprehensive range of products, Airedale offers a modular range of Refrigeration 
and Air Conditioning Training courses, for further information please contact Airedale. 

 

CUSTOMER SERVICES 

For further assistance, please e-mail: 

[email protected]

 or telephone: 

 

UK Sales Enquiries 

+ 44 (0) 113 238 7789 

[email protected] 

International Enquiries 

+ 44 (0) 113 239 1000 

[email protected] 

Spares Hot Line 

+ 44 (0) 113 238 7878 

[email protected] 

Airedale Service 

+ 44 (0) 113 239 1000 

[email protected] 

Technical Support 

+ 44 (0) 113 239 1000 

[email protected] 

Customer Services 

Training Enquiries 

+ 44 (0) 113 239 1000 

[email protected] 

 

 

For information, visit us at our Web Site: 

www.airedale.com

 

 

AIAC Ltd endeavours to ensure that the information in this document is correct and fairly stated, but 
none of the statements are to be relied upon as a statement or representation of fact. AIAC Ltd does 
not accept liability for any error or omission, or for any reliance placed on the information contained 
in this document. 

 

The development of Airedale products and services is continuous and the information in this 
document may not be up to date. It is important to check the current position with AIAC Ltd at the 
address stated. This document is not part of a contract or licence unless expressly agreed. 

 

Legal Notices 

No part of this document may be reproduced or transmitted in any form or by any means, electronic 
or mechanical, including photocopying, recording, or information storage and retrieval systems, for 
any purpose other than the purchaser’s personal use, without the express written permission of 
AIAC Ltd. 

 

 

 

©

 2008 Airedale International Air Conditioning Limited. All rights reserved. Printed in the UK. 

 

Содержание TurboChill TCC1 Series





























Отзывы: