A Drill a 0.017 inch (0.4 mm) diameter hole for each of the detail parts (see
Figure H).
B Attach each part with epoxy cement.
D. Attach all the landing gear doors.
8
9
A. Fill all joints and sand them smooth.
B. Add any scribed detail which you require and then polish the surface.
C. Wash the model in mild detergent to degrease it, then allow it to dry
throughly.
D. Paint the model, then apply the decals.
DETAIL PARTS
PAINTING AND FINISHING
© 1997 - Aircraft In Miniature Limited
Main Wheel
(4 on each truck)
Down Lock
Actuator Cylinder
Retraction
Cylinder
Forwa
rd
A
B
C
F
G
H
J
K
L
D/E
747 U/C parts Pt No.TW03-001/006
Brake Equalizer Rods
(Brass - K
2 on each truck)
Jury Strut
(Brass - D/L)
Side Strut
(Brass - A/B)
Wing landing gear
detail parts installation
G
