background image

Manual V1.00_2009_V5 

Safety information 

 
The 

XC-Trainer

 is equipped with an advanced 20 channel GPS receiver. With sufficient 

satellite coverage this will guarantee  very high position accuracy. 
 
Maps with inaccurate altitudes, incorrect altitude settings (pilot error) or simple instrument 
defects may lead to erroneous altitude indications. The pilot should always fly based on 
their own sound judgement and skills, and not rely solely on any instrument. This is 
particularly the case when flying with reduced visibility or when landing. 
 
The manufacturer is not liable for damage incurred due to erroneous altitude or position 
indication by the instrument. 
 
Consulting or even working with, the instrument should only be done when the situation 
allows it – otherwise please rely on the acoustic signals. 
 
The 

XC-Trainer

 must be mounted in a way that does not endanger neither pilot nor 

tandem passenger (if applicable) in any way. Always make sure the XC-Trainer is 
mounted so that it does not impede the pilot’s movements in the air on when 
launching/landing. Finally it is important to check that neither instrument nor part thereof 
may come loose, fall down and possibly hurt someone during the flight. 
 

The 

XC-Trainer

 should always be secured using the safety lanyard, 

see illustration. 

 

Before launching the pilot should verify that the instrument is working and that the 
rechargeable battery has sufficient power to last the entire flight. 
 
The 

XC-Trainer

 is spray-proof but not waterproof. Should water manage to find it’s way 

into the instrument we recommend opening the instrument and removing the batteries 
immediately. Then the innards may be dried carefully with a hair dryer (never attempt to 
dry in a microwave oven!). Should the instrument become flooded with seawater it must be 
thoroughly rinsed with fresh water before drying. Following this a comprehensive check at 

AIRCOTEC

 is then required. 

 

You use the 

XC-Trainer

 at you own risk. The manufacturer is not liable for damage or loss 

resulting from the use of the instrument, or the software included in the package. 

 

 

  

Page 

Содержание XC-trainer Series










































Отзывы: