4
TURNING THE THERMOSTAT ON AND OFF
Put the switch onto the
“ON”
position to start
the equipment or onto the
“OFF”
to turn it off.
TEMPERATURE SETTING
When the appliance is connected and the
electric power is switched on, set the desired
room temperature simply by turning the
temperature-adjusting
knob
to
the
corresponding value on the graduated scale.
PROBLEM SOLVING
PROBLEM
POSSIBLE CAUSE
SOLUTION
The system does not start
Wrong wiring
Check if the wiring connections
to the thermostat terminals were
carried out as per wiring diagram
The set room temperature has
been already reached
Increase or reduce the set
temperature value according to
the system application
(heating/air-conditioning system)
Switch on
OFF
position
Put switch onto
ON
position
The ambient temperature does
not correspond to the
temperature set on the
thermostat
Incorrect positioning of the
thermostat within the room
Follow the instructions of
paragraph “Placement of the
thermostat”
Air draughts coming from the
electrical wires conduit
Seal the conduit to prevent
warm or cold air draughts
NOTE:in case of repeated malfunctioning, please call our Technical Service. Do not tamper for any reason
with any part of the thermostat.
Tel : 05 56 70 14 00 - Fax 05 56 70 14 09
www.aircalo.fr
14 Avenue Cassiopée
33160 Saint-Médard-en-Jalles
M PB172-05-17_UK
